Banks Power 07.5-17 Ram 2500/3500 6.7L Diesel Monster-Ram Intake System w/ Fuel Line 4in Natural - 42790

Banks Power

(No reviews yet) Write a Review
MSRP: $576.67
$532.99
(You save $43.68 )
SKU:
GBE42790
Availability:
Regularly stocked product
Weight:
10.70 LBS
Shipping:
Calculated at Checkout
MPN:
42790
Proposition 65:
Y

Out of stock

Product Overview

Monster-Ram improves airflow from the intercooler. Flows 1008 cfm (77.01 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). Raises boost without increasing backpressure at the turbine. Result: a more responsive, power efficient engine. Up to four 1/8 inch NPT ports for flexibility! The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass while preventing wall wetting. Accommodates stock mounting points including Temperature and Pressure sensors, wire harness and dipstick tube. At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key. Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it. Utilizing the latest in electronic computational fluid-dynamic technology, tested on the flow bench as well as on the dyno, and finally proven in the real world where the rubber meets the road, Monster-Ram is a beast that only Banks could have unleashed. A simple, direct-replacement casting, Monster-Ram is instant power, performance and acceleration gratification. The factory inlet is cramped and angular compared to Banks' larger, streamlined cast-metal Monster-Ram. It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine. And with up to four ports for water/meth/propane/nitrous injection (or pressure/temp. sensors), the sky's the limit for performance expandability. Monster-Ram is CNC ported as well as the optional Banks Billet Intake Grid Heater Delete spacer.; Note: This product is for Race Use Only. Emissions equipment must be removed and requires a special ECU program available from others.

This Part Fits:

YearMakeModelSubmodel
2007-2010DodgeRam 2500Laramie
2007-2010DodgeRam 2500Power Wagon
2007-2010DodgeRam 2500SLT
2007DodgeRam 2500Sport
2007-2010DodgeRam 2500ST
2008-2010DodgeRam 2500SXT
2010DodgeRam 2500TRX
2007DodgeRam 2500TRX4
2007-2010DodgeRam 3500Laramie
2007-2010DodgeRam 3500SLT
2007DodgeRam 3500Sport
2007-2010DodgeRam 3500ST
2008-2010DodgeRam 3500SXT
2007DodgeRam 3500TRX4
2013-2018Ram2500Big Horn
2011-2018Ram2500Laramie
2014-2015Ram2500Laramie Limited
2011-2018Ram2500Laramie Longhorn
2016-2018Ram2500Limited
2013-2015Ram2500Lone Star
2012-2016Ram2500Outdoorsman
2011-2017Ram2500Power Wagon
2011-2018Ram2500SLT
2011-2013Ram2500ST
2013-2018Ram2500Tradesman
2013-2018Ram3500Big Horn
2011-2018Ram3500Laramie
2014-2015Ram3500Laramie Limited
2011-2018Ram3500Laramie Longhorn
2016-2018Ram3500Limited
2013-2015,2017Ram3500Lone Star
2011-2018Ram3500SLT
2011-2013Ram3500ST
2013-2018Ram3500Tradesman

Reviews

(No reviews yet) Write a Review